Stainless steel bolts have a wide range of applications. They are often used in daily life and are indispensable in our industrial production. However, this kind of parts often cannot be unscrewed. At this time, don`t be too anxious. You can try Solve it in various ways. A very simple and common way to deal with it is to screw the stainless steel bolts with a wrench, and continue to use a hammer to hit the handle of the wrench. According to the vibration of the knock, the bolts will loosen.
After the stainless steel bolts become loose, continue to burn the stainless steel bolts and nuts with a gas welding oxidizing flame. The increased gap between the screw and the screw will make it loose, and it can be removed easily and happily by continuing to use a wrench to twist it.
Stainless steel bolts often appear silky during use. At this time, it is a bit wasteful to replace them immediately. Some auxiliary means can be used to fix them. Unscrew the stainless steel bolt, wrap the double-sided tape or non-woven fabric on the bottom of it immediately, and screw it in again, this will also increase the friction, which can make the silky phenomenon disappear and prolong its service life .
When the stainless steel bolts are silky, you can also use 502 glue to deal with it. After screwing it out with a wrench, inject 502 glue into the screw hole immediately, and then screw it in. After the 502 glue inside is solidified , continue to use needle-nose pliers to unscrew the screw, and when you unscrew it again, you will find that the phenomenon of sliding teeth has disappeared, but after you unscrew it, make sure that the glue inside has completely solidified and hardened. If the timing is not grasped, it is not allowed Reasonably increase the degree of friction, and don't let the silky phenomenon subside.
There are also many abnormal phenomena in the use of stainless steel bolts. Silky and unscrewed are more common. After grasping their proper handling methods, you can deal with such situations in time. In addition, when stainless steel bolts are in use, the bolts may break and cannot be unscrewed in time. At this time, you can take out the broken bolts with the help of the anti-wire principle and the special drill for broken screws, and replace them with new stainless steel bolts. use. The occurrence of these problems with stainless steel bolts is mostly related to its quality. Therefore, when purchasing this type of product, you must pay attention to its quality, choose high-quality products produced by large manufacturers, and use them in an environment where conditions permit. If harmful substances cause corrosion to it, it will have a very long service life, and it can also avoid various problems in use.
Our company recommends high temperature alloy material fastener products: A286, GH2132, GH3030, GH4033, GH4080, GH4090, GH4145, GH4169, Inconel718,
1.4980, 2.4465, 2.4631, 2.4632, 2.4668, 2.4669, N06075, N07080, N07090, N07718, N07750, N66286, IncoloyA286, SUH660, 06Cr15Ni25Ti2MoAlVB, ASTMA453660 non-standard fastening products such as bolts and nuts.
When stainless steel bolts appear "silky", teach you some solutions
2022 12/30